Concrete Contractors in Memphis

On this page

June 14, 2026

A concrete contractor pours and finishes the foundations, driveways, patios, sidewalks, and commercial flatwork that a Memphis property depends on, and the right crew matters because concrete is unforgiving once it sets. Rather than treating a slab as a commodity, a local contractor evaluates the site in person, accounts for the Mid-South’s hot summers and expansive soils, and stands behind the cure. Memphis is Tennessee’s second-largest city, with a population of roughly 619,000 as of 2024 (U.S. Census Bureau), and its mix of established neighborhoods, suburban growth in Shelby County, and a large distribution and logistics sector keeps both residential and commercial concrete in steady demand.

The market context spans a wide range of work. Memphis sits at the center of a Mid-South metro that reaches into Mississippi and Arkansas, and many area contractors hold licenses in multiple states to serve that regional footprint. Concrete jobs run from a single residential driveway or patio to reinforced shop slabs, parking lots, loading docks, and industrial foundations tied to the region’s warehouse and distribution economy. The right contractor for a project depends on whether the job is decorative, structural, or high-volume commercial flatwork.

Licensing is the first regulatory point a Memphis buyer should understand. Concrete, masonry, and flatwork contracting falls under the Tennessee Board for Licensing Contractors, and a state contractor license is required for any project totaling $25,000 or more in combined labor and materials. Smaller residential jobs valued between $3,000 and $25,000 fall under the Home Improvement (HI) license, which applies in Shelby County along with Davidson, Knox, and Hamilton. Buyers can confirm a contractor’s license, classification, and monetary limit through the Board at tn.gov before signing. On the tax side, materials purchased for a job carry Tennessee’s 7% state sales tax plus the local option, reaching a combined 9.75% in Shelby County, and how labor is taxed depends on how the contract is structured.

Service offerings in Memphis reflect both climate and use. The Mid-South’s heat accelerates curing, so timing, water content, and finishing technique affect how a slab performs, while expansive clay soils make proper base preparation and reinforcement important for driveways and foundations alike. Decorative options such as stamped and stained concrete are popular for patios and pool decks, and commercial clients draw on the same crews for slabs, parking lots, and ADA-compliant sidewalks and ramps. Because a poorly prepared slab can crack or heave, buyers should request written details on mix specification, reinforcement, and warranty. Tennessee’s consumer protection framework, administered by the Division of Consumer Affairs under the Tennessee Consumer Protection Act (TCA 47-18-104), handles complaints about deceptive trade practices, and the state’s mechanics’ lien law (TCA 66-11-145) gives contractors 90 days from completion to file a lien, a timeline worth understanding when scheduling payment milestones.

Top Concrete Contractors in Memphis

1. Castor Concrete

Address: 4865 Magee Dr, Memphis, TN 38128
Phone: (901) 246-8966
Website: https://castorconcrete.com
Services: driveways, patios and outdoor living, stamped concrete, foundations, sidewalks and walkways, commercial projects including parking lots and industrial floors
Description: Castor Concrete is a Memphis concrete contractor that handles both residential and commercial work from a base on Magee Drive in the northeast part of the city. Its residential services cover driveways, patios and outdoor living spaces, stamped concrete, foundations, and sidewalks and walkways, while its commercial work extends to parking lots and industrial floors. The company describes its driveways as built to withstand Tennessee weather and states that it is licensed and insured. Its service area reaches across the Mid-South, including Germantown, Collierville, Bartlett, Millington, and Lakeland in Tennessee along with Southaven and Olive Branch in Mississippi and West Memphis in Arkansas, reflecting the cross-state footprint common among Memphis-area concrete firms.

2. Bluff City Concrete LLC

Address: Memphis, TN (street address not published; confirm by phone)
Phone: (901) 567-9261
Website: https://bluffcityconcretellc.com
Services: concrete driveways, patios, sidewalks, concrete polishing, concrete resurfacing, concrete demolition, decorative epoxy
Description: Bluff City Concrete is a Memphis-based concrete contractor serving residential, commercial, and industrial clients across the Mid-South. Its service list combines new flatwork such as driveways, patios, and sidewalks with finishing and rehabilitation services including concrete polishing, resurfacing, decorative epoxy, and demolition, which makes it a practical choice for both new pours and the renewal of existing surfaces. The company states that it is licensed and insured and emphasizes the use of professional equipment and established placement practices. Its service area covers Memphis and surrounding Tennessee communities such as Germantown, Collierville, Bartlett, Cordova, Millington, Lakeland, and Arlington, along with several northern Mississippi towns. Because the firm does not publish a street address, buyers should confirm contact details and verify any required contractor license at tn.gov.

3. BHS Concrete

Address: Memphis, TN (street address not published; confirm by phone)
Phone: (901) 883-0128
Website: https://bhsconcrete.com
Services: driveways and parking pads, retaining walls, patios, walkways and sidewalks, garage and shed slabs, decorative and stamped concrete, commercial and industrial foundations, parking lots, ADA sidewalks and ramps, vehicular pavement
Description: BHS Concrete is a Memphis concrete contractor that serves homeowners, builders, and commercial clients throughout the Mid-South. Its residential work covers driveways, expansions, parking pads, retaining walls, patios, walkways, and slabs for garages, sheds, and additions, while its commercial scope extends to industrial foundations, parking lots, loading areas, ADA-compliant sidewalks and ramps, and vehicular pavement. The company states that it is licensed in Tennessee, Mississippi, and Arkansas, which lets it serve the tri-state region around Memphis, and it emphasizes placing concrete using proven practices. The broad residential-to-commercial range makes it a single point of contact for varied project types. Because the firm does not publish a street address, buyers should confirm contact details and verify the license at tn.gov before contracting.

Frequently Asked Questions About Concrete Contractors in Memphis

Q: Does a Memphis concrete contractor need a state license?

A concrete contractor must hold a license from the Tennessee Board for Licensing Contractors for any project totaling $25,000 or more in combined labor and materials. Residential concrete work valued between $3,000 and $25,000 falls under the Home Improvement (HI) license, which applies in Shelby County. Smaller jobs below $3,000 do not require a state-level license, though City of Memphis and Shelby County permit rules may still apply to a given pour.

Q: How much is sales tax on concrete materials in Memphis?

Tennessee charges a 7% state sales tax, and Shelby County adds a local option tax that brings the combined rate to 9.75%. Materials purchased for a job are taxed at that rate, while labor may be handled differently depending on how the contractor structures the contract, so buyers should request an itemized invoice that separates materials, labor, and tax.

Q: Why does soil matter for concrete work in Memphis?

The Mid-South has areas of expansive clay soil that can shift with moisture, which stresses driveways, slabs, and foundations poured over an inadequate base. Proper site preparation, compaction, an appropriate mix specification, and reinforcement with rebar or mesh help concrete resist cracking and heaving. Buyers should ask a contractor to document the base preparation and reinforcement plan before work begins.

Q: Can a Memphis concrete contractor work in Mississippi and Arkansas too?

Many Memphis-area contractors serve the tri-state Mid-South and hold licenses in Tennessee, Mississippi, and Arkansas to do so. A contractor’s license requirements differ by state, so for a project across the state line, buyers should confirm that the contractor holds the appropriate license in the state where the work will be performed.

Q: What should I confirm before signing a concrete contract in Memphis?

Request written documentation of the mix specification, reinforcement, the warranty, the payment schedule, and the expected timeline, and confirm the contractor’s license through the Tennessee Board for Licensing Contractors at tn.gov. Because Tennessee’s mechanics’ lien law (TCA 66-11-145) allows a contractor to file a lien within 90 days of completion, structuring payments around completion milestones protects both sides.

Q: How do I file a complaint against a Memphis concrete contractor?

Complaints about deceptive trade practices or contract disputes can be filed with the Tennessee Division of Consumer Affairs, which enforces the Tennessee Consumer Protection Act (TCA 47-18-104). Disputes involving a licensed contractor can also be directed to the Tennessee Board for Licensing Contractors. Keeping the signed contract, payment records, and photographs of any defective work strengthens a complaint.

Leave a comment

Your email address will not be published. Required fields are marked *