Concrete Contractors in Clarksville

On this page

June 14, 2026

A concrete contractor pours and finishes the driveways, patios, foundations, slabs, and footers that a Clarksville property depends on, and the right crew matters because concrete is unforgiving once it sets. Rather than treating a slab as a commodity, a local contractor evaluates the site in person, accounts for Middle Tennessee’s clay soils and freeze-thaw cycles, and stands behind the cure. Clarksville is one of Tennessee’s largest and fastest-growing cities, with a population of roughly 176,000 as of 2024 (U.S. Census Bureau), and its rapid residential expansion, driven in part by Fort Campbell nearby, keeps both residential and commercial concrete in steady demand across Montgomery County.

The market context favors crews that can keep pace with new construction. Much of Clarksville’s growth comes from new subdivisions and the slabs, driveways, and sidewalks that accompany them, alongside a steady stream of patios, pool decks, and repair work in established neighborhoods. Concrete jobs range from a single residential driveway or stamped patio to footers, foundations, and commercial flatwork. The right contractor for a project depends on whether the job calls for decorative finishing, structural reinforcement, or higher-volume flatwork, and some firms serving Clarksville operate from the broader Nashville metro to its southeast.

Licensing in Clarksville carries an important local distinction. Concrete, masonry, and flatwork contracting falls under the Tennessee Board for Licensing Contractors, and a state contractor license is required for any project totaling $25,000 or more in combined labor and materials, the same threshold that applies statewide. The Home Improvement (HI) license, which covers smaller residential work valued between $3,000 and $25,000, applies only in a set of designated Tennessee counties such as Davidson, Shelby, Knox, and Hamilton, and it does not apply in Montgomery County. That means residential concrete work in Clarksville below the $25,000 state threshold is not governed by the HI license class, though the state contractor license requirement still applies at and above $25,000, and local permits may still apply. Buyers can confirm any contractor’s license, classification, and monetary limit through the Board at tn.gov. On the tax side, materials purchased for a job carry Tennessee’s 7% state sales tax plus the local option, reaching a combined 9.50% in Montgomery County, and how labor is taxed depends on how the contract is structured.

Service offerings in Clarksville reflect both climate and the pace of new building. Middle Tennessee winters bring freeze-thaw cycles that can crack poorly poured concrete, so control joints, reinforcement, and proper curing matter for driveways and walkways, while expansive clay soils make base preparation important for slabs and footers. Decorative options such as stamped and stained concrete are popular for patios and pool decks. Because base preparation and reinforcement drive long-term performance, buyers should request written details on mix specification, reinforcement, and warranty. Tennessee’s consumer protection framework, administered by the Division of Consumer Affairs under the Tennessee Consumer Protection Act (TCA 47-18-104), handles complaints about deceptive trade practices, and the state’s mechanics’ lien law (TCA 66-11-145) gives contractors 90 days from completion to file a lien, a timeline worth understanding when scheduling payment milestones.

Top Concrete Contractors in Clarksville

1. Pumas Concrete

Address: 5769 Mount View Rd, Antioch, TN 37013 (serves Clarksville)
Phone: (615) 651-6969
Website: https://pumasconcrete.com
Services: concrete driveways, slabs, patios, pool decks, retaining walls, stamped concrete, exposed aggregate, colored and stained concrete, walkways and sidewalks, steps and entryways, commercial flatwork, commercial and industrial slabs
Description: Pumas Concrete, operating as Los Pumas Concrete LLC, is a concrete contractor based on Mount View Road in Antioch that serves Clarksville as part of a service area covering roughly a 30-mile radius from Nashville, with Clarksville, Springfield, Dickson, and Madison named among its markets. The company describes a structured, engineering-oriented approach to residential and commercial work, citing a 4,000 PSI mix, a full rebar grid on chair rails, base pre-hydration, and pump-poured delivery with a hand finish, and it states that it is certified under a documented placement protocol. Its services span driveways, slabs, patios, pool decks, retaining walls, and decorative finishes including stamped, exposed aggregate, and colored concrete, along with commercial and industrial flatwork. The company notes a minimum project size, so it is oriented toward larger residential and commercial pours rather than small repairs.

2. Clarksville Concrete Services

Address: Clarksville, TN (street address not published; confirm by phone)
Phone: (931) 345-4111
Website: https://www.clarksvilleconcreteservices.com
Services: driveways, patios, stamped concrete, concrete slabs and pads, concrete steps, concrete restoration and repair
Description: Clarksville Concrete Services is a locally owned Clarksville concrete contractor that the company reports brings more than 20 years of experience to residential and commercial work. Its services cover driveways, patios, stamped concrete, slabs and pads, steps, and concrete restoration and repair, which makes it a practical choice for both new installations and the renewal of aging surfaces. The company describes itself as fully insured and emphasizes stamped concrete design alongside both major and minor repairs. Its stated service area reaches communities around Clarksville and into the surrounding region. Because the firm does not publish a street address, buyers should confirm contact details and verify any required contractor license through the Tennessee Board for Licensing Contractors at tn.gov before contracting.

3. Clarksville Concrete Construction

Address: Clarksville, TN (street address not published; confirm by phone)
Phone: (931) 272-2338
Website: https://www.concrete-clarksvilletn.com
Services: concrete driveways and driveway repair, stamped concrete, patios, foundations, retaining walls, sidewalks and walkways, garage slabs, stained and decorative concrete, concrete resurfacing, pool decks, curbs and gutters, foundation repair
Description: Clarksville Concrete Construction is a Clarksville concrete contractor offering a broad range of residential and commercial services across the city and surrounding region. Its work covers driveways and driveway repair, stamped concrete, patios, foundations and foundation repair, retaining walls, sidewalks, garage slabs, stained and decorative concrete, resurfacing, pool decks, and curbs and gutters, which makes it suitable for both new construction and the repair of existing surfaces. The company emphasizes decorative techniques such as stamping and staining and serves neighborhoods around Clarksville including New Providence, West Creek, and Kenwood. Because the firm does not publish a street address, buyers should confirm contact details and verify any required contractor license through the Tennessee Board for Licensing Contractors at tn.gov before contracting.

Frequently Asked Questions About Concrete Contractors in Clarksville

Q: Does a Clarksville concrete contractor need a state license?

A concrete contractor must hold a license from the Tennessee Board for Licensing Contractors for any project totaling $25,000 or more in combined labor and materials, the same statewide threshold. Below that amount, residential concrete work in Clarksville is not governed by the Home Improvement (HI) license, because that license class does not apply in Montgomery County. Local permits may still apply to a given pour, and buyers can verify a contractor’s license at tn.gov.

Q: Why is the Home Improvement license different in Clarksville?

The Home Improvement (HI) license covers smaller residential work valued between $3,000 and $25,000, but it applies only in certain designated Tennessee counties, such as Davidson, Shelby, Knox, and Hamilton. Montgomery County, where Clarksville is located, is not among them, so the HI license class does not apply locally. The state contractor license requirement for projects at or above $25,000 still applies in Clarksville just as it does elsewhere in Tennessee.

Q: How much is sales tax on concrete materials in Clarksville?

Tennessee charges a 7% state sales tax, and Montgomery County adds a local option tax that brings the combined rate to 9.50%. Materials purchased for a job are taxed at that rate, while labor may be handled differently depending on how the contractor structures the contract, so buyers should request an itemized invoice that separates materials, labor, and tax.

Q: How does Clarksville’s climate affect concrete work?

Middle Tennessee winters bring freeze-thaw cycles that can crack concrete poured without proper air entrainment, control joints, and curing, and the area’s clay soils can shift with moisture. Proper base preparation and reinforcement help driveways, slabs, and footers resist cracking. Buyers should ask a contractor to document the mix specification, reinforcement, and joint plan before work begins.

Q: What should I confirm before signing a concrete contract in Clarksville?

Request written documentation of the mix specification, reinforcement, the warranty, the payment schedule, and the expected timeline, and confirm the contractor’s license through the Tennessee Board for Licensing Contractors at tn.gov for any project at or above $25,000. Because Tennessee’s mechanics’ lien law (TCA 66-11-145) allows a contractor to file a lien within 90 days of completion, structuring payments around completion milestones protects both sides.

Q: How do I file a complaint against a Clarksville concrete contractor?

Complaints about deceptive trade practices or contract disputes can be filed with the Tennessee Division of Consumer Affairs, which enforces the Tennessee Consumer Protection Act (TCA 47-18-104). Disputes involving a licensed contractor can also be directed to the Tennessee Board for Licensing Contractors. Keeping the signed contract, payment records, and photographs of any defective work strengthens a complaint.

Leave a comment

Your email address will not be published. Required fields are marked *