Fence Contractor in Nashville

June 14, 2026

A fence is one of the few home improvements that touches property lines, local zoning, utility safety, and contractor licensing all at once, which is why working with a Nashville fence contractor who knows Middle Tennessee rules matters more than ordering panels online. A local installer can walk the property, confirm setbacks against Metro Nashville zoning, account for the region’s clay soil and slope when setting posts, and coordinate the utility locates that Tennessee law requires before any digging. Nashville is the state’s largest city, with a population of roughly 715,388 as of 2024 (U.S. Census Bureau), and its steady growth has kept demand high for both new residential fencing and commercial perimeter and security work.

The regulatory picture is the part homeowners most often overlook. Fence installation falls under the Tennessee Board for Licensing Contractors when a single project totals $25,000 or more in combined labor and materials, in which case the contractor must hold a state contractor license backed by a $25,000 minimum monetary limit and audited financials. Smaller residential fence work falls under the Home Improvement (HI) license, which applies to projects valued between $3,000 and $25,000 in the counties that have adopted it, including Davidson County. Beyond licensing, fence height and placement are governed by local zoning ordinances and, in many neighborhoods, by homeowners association rules, so a front-yard height limit or a required setback from the sidewalk is a city or HOA question rather than a state one.

Two safety and payment rules deserve attention before a project starts. Before digging post holes, Tennessee law requires calling Tennessee 811, the state’s one-call utility-locate service, so that buried gas, electric, water, and communication lines can be marked at no charge; skipping this step risks injury, service outages, and liability for damage. On the payment side, Tennessee’s mechanics’ and materialmen’s lien law (TCA Title 66, Chapter 11) sets the notice and filing deadlines a contractor or supplier must meet to claim a lien for unpaid work, which is why homeowners benefit from written contracts and milestone payments tied to completed phases. Sales tax also applies to fence materials: in Davidson County the combined state and local rate is 9.75%, so an itemized invoice that separates materials, labor, and tax helps buyers understand the total.

Material choice in Nashville reflects climate, budget, and purpose. Wood, usually cedar or pressure-treated pine, remains the most common privacy option, though Middle Tennessee’s humid summers and freeze-thaw cycles make staining and sealing worthwhile for longevity. Vinyl costs more up front but resists rot and needs little maintenance, aluminum suits decorative and pool enclosures where code requires self-closing and self-latching gates, and chain link remains the economical choice for large yards, dog runs, and commercial sites. Consumer protection for fence buyers runs through the Tennessee Division of Consumer Affairs under the Tennessee Consumer Protection Act (TCA 47-18-104), which handles complaints about deceptive practices, while a contractor’s license status can be checked through the Board for Licensing Contractors at tn.gov before signing.

Top Fence Contractor Providers in Nashville

1. K & C Fence Company

Address: 2503 Hart Street, Nashville, TN 37207
Phone: (615) 562-7651
Website: https://www.fencenashville.net
Services: wood and privacy fencing, PVC vinyl, aluminum, chain link, picket, steel, farm fencing, commercial fencing, fence repair, staining and sealing, installation
Description: K & C Fence Company is a family-owned Nashville fence contractor founded in 2009 and based on Hart Street in the Davidson County 37207 area. The company holds a Tennessee State Contractor’s License, a distinction it emphasizes as relatively uncommon among local fence installers, and carries workers’ compensation and general liability insurance. It is an A+ accredited business with the Better Business Bureau and an American Fence Association certified contractor. The company installs privacy, wood, aluminum, chain link, picket, PVC vinyl, steel, and farm fencing for both residential and commercial clients across Nashville and the surrounding Davidson County area, and it offers fence repair, staining and sealing, and financing. K & C also serves outlying communities, listing coverage that reaches Franklin and Clarksville from its Nashville office.

2. Pro-Line Fence Co.

Address: Nashville, TN (street address not published; confirm by phone)
Phone: (615) 642-0678
Website: https://prolinefencecompany.com
Services: wood, vinyl, aluminum, and chain link fencing, picket, privacy, security, pool, and specialty fences, automatic and driveway gates, access control systems, fence repair, builder and contractor services
Description: Pro-Line Fence Co. is a licensed and insured fence contractor that states it has served Middle Tennessee for more than 18 years, working across Nashville, Franklin, Brentwood, Oak Hill, Hermitage, Nolensville, Belle Meade, and Green Hills. The company installs wood, vinyl, aluminum, and chain link fencing along with picket, privacy, security, pool, and specialty styles for residential and commercial clients, and it maintains a dedicated gates and access control division reachable at a separate line, (615) 775-4485, for automatic, driveway, aluminum, wood, and chain link gate systems. Pro-Line describes itself as an authorized Elite Fence dealer using American-made materials backed by a manufacturer lifetime warranty, and it offers fence repair and builder and contractor support in addition to free estimates. The company does not publish a street address on its site, so buyers should confirm its location and service details by phone.

3. Langford Fence Company Inc.

Address: McEwen, TN 37101 (serves the Nashville area; confirm scheduling by phone)
Phone: (931) 296-3212
Website: https://langfordfence.com
Services: chain link, wood, vinyl, aluminum, steel, wrought iron, composite, post and rail fencing, residential, commercial, and farm installation, consultation and estimates
Description: Langford Fence Company is a long-established Tennessee fence contractor founded in 1955 and based in McEwen, west of Nashville, that serves the Nashville area and much of Middle Tennessee. The company holds Tennessee contractor license #29467 and is a member of the American Fence Association, and it has been recognized as a Certified Made in Tennessee Manufacturer since 2020. Langford installs chain link, wood, vinyl, aluminum, steel, wrought iron, composite, and post and rail fencing for residential, commercial, and farm customers, and it manufactures an exclusive Langfence Rustic Post and Rail product line. Its published service area includes Nashville along with Brentwood, Franklin, Hermitage, Mt. Juliet, Clarksville, Dickson, and other Middle Tennessee communities, and financing is available through a third-party lender. Because the company operates from McEwen rather than within Davidson County, buyers should confirm scheduling and service coverage for their specific Nashville location.

Frequently Asked Questions About Fence Contractor in Nashville

Q: Does a fence contractor in Nashville need a license?

A fence contractor needs a Tennessee state contractor license from the Board for Licensing Contractors when a project totals $25,000 or more in combined labor and materials. Smaller residential fence projects valued between $3,000 and $25,000 fall under the Home Improvement (HI) license, which applies in Davidson County. You can verify a contractor’s license status through the Board for Licensing Contractors at tn.gov before signing a contract.

Q: Do I need to call 811 before installing a fence in Nashville?

Yes. Tennessee law requires contacting Tennessee 811, the state’s one-call service, before digging post holes so that buried utilities can be located and marked at no cost. This protects against striking gas, electric, water, or communication lines, and it shifts liability appropriately when the locate is done correctly. Reputable contractors handle the 811 request as part of their process, but homeowners should confirm it was made before any digging begins.

Q: How tall can my fence be in Nashville?

Fence height is set by local Metro Nashville zoning ordinances rather than by state law, and limits commonly differ between front yards and back yards. Many neighborhoods also fall under homeowners association rules that govern height, style, and materials. Because the specific limit depends on your zoning district and any HOA covenants, confirm the allowable height with Metro codes and your HOA before installation.

Q: How much is sales tax on fence materials in Nashville?

Fence materials are subject to Tennessee’s 7% state sales tax plus Davidson County’s local option tax, for a combined rate of 9.75%. Labor may be taxed differently depending on how the contractor structures the transaction, so request an itemized invoice that separates materials, labor, and tax.

Q: What protects me if a fence contractor does not finish the job?

A written contract with payment milestones tied to completed phases offers the strongest protection. Tennessee’s mechanics’ and materialmen’s lien law (TCA Title 66, Chapter 11) sets the notice and filing deadlines a contractor or supplier must meet to claim a lien for unpaid work, which is one reason to keep payment records and avoid large upfront payments. Disputes over deceptive practices can be reported to the Tennessee Division of Consumer Affairs under the Tennessee Consumer Protection Act (TCA 47-18-104).

Q: Should the contractor handle permits and HOA approval?

Many fence contractors will pull required Metro permits and can advise on setback and height rules, but homeowners association approval is usually the property owner’s responsibility. Clarify in writing who is responsible for permits, HOA submissions, and utility locates before work starts, and keep copies of any approvals in case of a later dispute.