Marble Contractor in Clarksville

June 15, 2026

A marble contractor differs from a countertop showroom in scope: rather than focusing on selling slabs across a sales floor, the contractor templates, fabricates, and installs natural stone throughout a home or building, working marble, granite, quartzite, and travertine into countertops, floors, shower walls and pans, fireplace surrounds, vanities, stair treads, and commercial surfaces, and often returning later to polish, hone, seal, or repair stone that has dulled or chipped. Clarksville is one of Tennessee’s largest cities, with a population of roughly 176,456 as of the 2024 American Community Survey (U.S. Census Bureau), and its steady residential growth across Montgomery County, driven in part by the nearby Fort Campbell community, keeps demand consistent for full-service natural stone work that goes beyond a single kitchen counter.

The work spans more rooms and surfaces than countertop retail alone. A marble contractor may set a honed marble bathroom floor, build a curbless stone shower, clad a fireplace in book-matched slabs, fabricate a quartzite island, or restore the polish on a travertine entry that has worn over years of traffic. Material behavior drives much of the planning: marble and travertine are softer, calcium-based stones that etch from acids and call for careful sealing and periodic honing, while granite and quartzite are harder and more stain-resistant. Many natural stone contractors also fabricate engineered quartz, which is manufactured from crushed stone bound in resin and sold under brands such as Cambria, Silestone, and Caesarstone, giving buyers a low-maintenance alternative alongside quarried stone. Edge profiles, finish choices from polished to honed to leathered, and seam placement are all part of the contractor’s planning rather than an off-the-shelf selection.

Licensing in Tennessee turns on the size of the job, not the material. Projects totaling $25,000 or more in combined labor and materials require a contractor license from the Tennessee Board for Licensing Contractors, which sets a minimum monetary limit tied to a financial statement and is searchable at verify.tn.gov. The state’s Home Improvement license, which covers residential work valued between $3,000 and $25,000, applies only in a defined set of counties that does not include Montgomery, so in Clarksville that mid-range license class is not a factor; work below the $25,000 contractor threshold carries no state-level license requirement, though local permits may still apply. The store collects the 7% state sales tax plus the local option tax on materials; in Montgomery County the combined rate reaches 9.50%. Because a fabrication-and-installation contract is taxed differently from a simple over-the-counter materials sale, the way a contractor structures the invoice affects how tax applies, which is one reason an itemized contract matters.

Product and service decisions in Clarksville also reflect how stone lives in the local climate and housing stock. Humid Middle Tennessee summers make proper sealing important for porous marble and travertine in baths and entries, and the area’s heavy share of newer construction means many projects involve fresh installation of stone countertops, floors, and shower surrounds rather than restoration alone, though older homes still call for matching and repair. For consumers, the practical safeguards are documentation and verification: request written copies of the material warranty and the installation or restoration guarantee, and get an itemized contract before work begins. Tennessee’s consumer protection framework, administered by the Division of Consumer Affairs under the Tennessee Consumer Protection Act (TCA 47-18-104), handles complaints about deceptive trade practices, and the state’s mechanics’ lien law (TCA 66-11-145) gives contractors 90 days from completion to file a lien, a timeline worth understanding when scheduling payments. Confirming a contractor’s license through the Board at verify.tn.gov is worthwhile on any job near or above the $25,000 threshold.

Top Marble Contractor Providers in Clarksville

1. National Stone World

Address: 1311 College Street, Clarksville, TN 37040
Phone: (931) 647-7199
Website: not available
Services: granite, marble, quartzite, soapstone, onyx, and engineered quartz fabrication and installation, kitchen countertops, bathroom vanities, outdoor countertops, fireplaces, sill rails, repairs, cabinetry, commercial work
Description: National Stone World is a Clarksville natural stone fabricator and installer on College Street, with business records showing it has operated since 2007, roughly 19 years in the local market. The company manufactures and installs natural and engineered stone for kitchens, bathrooms, outdoor spaces, and commercial projects, working in granite, marble, quartzite, soapstone, onyx, and engineered quartz, and handling specialty pieces such as fireplaces and sill rails as well as repair work and cabinetry. It operates from a Clarksville office with its own production facility and offers delivery and onsite installation, reporting service within about a 50-mile radius that covers Montgomery County and neighboring communities. The company does not maintain a dedicated website, but its location, phone, and operating history are confirmed across multiple independent business directories.

2. Granite Masters of Nashville

Address: 47 Industry Street, Nashville, TN 37210 (serves the Clarksville market from its Nashville fabrication shop)
Phone: (615) 251-1725
Website: https://www.granitemasters.us
Services: granite, marble, quartz, and quartzite fabrication and installation, countertops, vanities, fireplaces, outdoor kitchens, backsplashes, onsite cutting and faucet-hole drilling, chip, crack, and seam repair, sink reattachment
Description: Granite Masters of Nashville is a family-owned natural stone fabricator founded in April 2015 by Rigoberto Vazquez, whose work in the stone industry traces back to 1996, and the company notes that multiple generations of the Vazquez family work alongside its team. From its fabrication shop on Industry Street in Nashville, the company fabricates and installs granite, marble, quartz, and quartzite for kitchens, bathrooms, fireplaces, outdoor kitchens, and backsplashes, and it handles onsite cutting, faucet-hole drilling, chip and seam repair, and sink reattachment. It serves homeowners, contractors, and businesses across Middle Tennessee, and its dedicated Clarksville service page confirms it covers the Clarksville market from the Nashville shop, giving Montgomery County buyers a metro fabricator option within driving distance for delivery and installation.

3. Tennessee Stone Care

Address: Clarksville, TN (service-based natural stone restoration; serves the metro)
Phone: (615) 351-4676
Website: https://www.tnstonecare.com
Services: marble polishing and honing, granite cleaning and sealing, travertine honing and restoration, limestone and slate restoration, quartzite and onyx polishing, terrazzo polishing, tile and grout cleaning and sealing, bath and shower restoration, floor restoration, commercial maintenance
Description: Tennessee Stone Care is a family-owned natural stone restoration and maintenance company founded in 2000 by John Kunz and now in its third decade serving the state, with Clarksville among its listed service areas. Rather than selling or fabricating slabs, it specializes in the care side of the trade, cleaning, sealing, honing, polishing, restoring, and repairing marble, granite, limestone, travertine, slate, quartzite, onyx, soapstone, and terrazzo across floors, countertops, showers, and exterior hardscapes. The company states it does not franchise or subcontract its work, and its focus on restoration makes it a resource for Clarksville owners who need to revive etched, worn, or damaged natural stone rather than install new material. Because it operates as a service-based provider covering the metro, work is performed on site at the customer’s home or building.

Frequently Asked Questions About Marble Contractors in Clarksville

Q: Does a Clarksville marble contractor need a license?

It depends on the size of the job. A project totaling $25,000 or more in combined labor and materials requires a license from the Tennessee Board for Licensing Contractors, which can be confirmed at verify.tn.gov. The state’s Home Improvement license, which covers residential work between $3,000 and $25,000, applies only in certain counties and not in Montgomery County, so in Clarksville that mid-range class is not a factor. Work below the $25,000 threshold carries no state-level license requirement, though local permits may still apply.

Q: How much is sales tax on marble work in Clarksville?

Tennessee charges a 7% state sales tax, and Montgomery County adds a local option tax that brings the combined rate to 9.50%. How the tax applies can depend on whether the contractor structures the job as a materials sale plus a service or as a single fabrication-and-installation contract, which is taxed differently from a simple retail materials sale. Ask for an itemized contract that separates materials, fabrication, labor, and tax.

Q: What does a marble contractor install besides countertops?

A full-service natural stone contractor works across many surfaces: marble and travertine bathroom floors, stone shower walls and pans, fireplace surrounds, vanity tops, stair treads, entry and foyer floors, and commercial surfaces such as lobbies and reception desks. Many also fabricate engineered quartz alongside natural stone, and some offer ongoing care, including polishing, honing, sealing, and repair, for stone that has dulled or been damaged over time.

Q: How is marble different from granite or quartz for Clarksville homes?

Marble and travertine are softer, calcium-based stones that can etch when exposed to acids such as citrus or vinegar and benefit from periodic sealing and honing, which makes them better suited to lower-traffic baths, fireplaces, and floors than heavily used kitchen counters for some households. Granite and quartzite are harder and more resistant to scratches and stains. Engineered quartz is nonporous and low maintenance but is a manufactured product rather than quarried stone. A contractor can walk through how each material performs in a given room.

Q: Can a marble contractor restore old or etched stone instead of replacing it?

Yes. Natural stone restoration is a distinct service within the trade. Specialists clean, hone, polish, and seal marble, travertine, granite, and other stone to remove etching, scratches, and dullness, and they repair chips and cracks, which can renew an existing floor, countertop, or shower without a full replacement. Confirm in writing what the restoration includes and what result is expected before work begins.

Q: How do I file a complaint against a Clarksville marble contractor?

Complaints about deceptive trade practices or contract disputes can be filed with the Tennessee Division of Consumer Affairs, which enforces the Tennessee Consumer Protection Act (TCA 47-18-104). Disputes involving a licensed contractor can also go to the Board for Licensing Contractors. Because the state’s mechanics’ lien law (TCA 66-11-145) allows a contractor to file a lien within 90 days of completion, keeping the signed contract, payment records, and photos of any defective work strengthens a complaint.